Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Electronic Projects

Top resources

Trending resources

Resource statistics

Categories
21
Electronic Projects
370
Downloads
61
Disk usage
16.9 MB
Circuit applies full actuation power to solenoid with PWM hold reducing power to 12-25% of nominal
Minimal circuit for auto CC/CV charging. Option allows pot adjustment of charge current.
Two simple high-side sense current limit circuits adjust to zero current and have low voltage drop
Combination of Binary & BCD counters do Binary↔BCD conversions.
Inexpensive, single regulator IC power supply with I and V adj. to zero, includes I & T monitors
Good for low-drop diode applications, such as blocking battery back-charging or brownout protection
PB alternate action circuit uses CD4013 FF with simple debounce to control relay (or other load).
Lead-acid battery charger starts with constant-current and ends with constant-voltage trickle charge
Capacitor resonant charging can nearly double the charge efficiency and quadruple energy stored.
Circuit outputs the min. or max. value of several analog inputs, or provides accurate bi-level clamp
Just for fun I designed and built this simple circuit which drives a monostable relay by a singol m
Single +output plus dual +/- tracking output supply using common 3-terminal regulators goes to 0V.
MOSFET bridge for efficient resistive load rectification, or indifference to input power polarity.
PWM allows easy control of linear regulator output voltage for μP based power supplies
CD4106 PWM circuit uses only 2 diodes, 1 capacitor, and 1 potentiometer
Circuit generates Av=+1 with simple offset calculation using std. resistor values
Constant-current hysteretic buck regulator supply for high power LEDs, efficiency of 90%

Latest threads

Back
Top