SCR. RCA type HC 8310

Status
Not open for further replies.

RODALCO

Well-Known Member
Hi,
Does anyone have the data for the RCA scr, which is used in a 110 Volts 2.5 Amps, dc substation battery charger?
charger is about 20 years old.
type HC 8310 also the number S28000.
These are used as a pair to rectify AC to DC with the assistance of a pair of standard 5408 , 3 Amp rectifier diodes from the secondary of the chargers transformer.
I Goooogled for it with no luck.
Many thanks
Raymond
 
If you just use an over-rated SCR, say: 400 volts, 5 amps, in a similar package, it should work OK. Digikey has a good search engine, you can specify the parameters. Just enter SCR in the search. www.digikey.com
 
I got it sorted out.
Put in BT 151 SCR's which are rated at 500 Volts 7.5 Amps.
Charger works perfectly and is currently under soaktest.
Many thanks Russlk
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…