K ken halpin New Member Jun 28, 2010 #1 can you help I need to take a floating 0 -10v dc i/p multiply the signal by a number to 6 decimal places i.e. 1.435678 & give a 0 - 10v dc o/p. anybody got any ideas. Ken
can you help I need to take a floating 0 -10v dc i/p multiply the signal by a number to 6 decimal places i.e. 1.435678 & give a 0 - 10v dc o/p. anybody got any ideas. Ken
crutschow Well-Known Member Most Helpful Member Jun 28, 2010 #2 What is the reason for the 6 decimal place requirement? It you really need that degree of accuracy, it can not be readily done with analog techniques.
What is the reason for the 6 decimal place requirement? It you really need that degree of accuracy, it can not be readily done with analog techniques.
P Pommie Well-Known Member Most Helpful Member Jun 28, 2010 #3 Even doing it digitally would require a 22 bit ADC and DAC. Mike.