Im making a timer for a water pump, out of a 120V Solid State Relay.
its has adjustble ON and OFF delays from 2 seconds to 4h 30min.
Pin # Schematic Pin Delay Time
9 Q1 2 sec
7 Q4 16 sec
5 Q5 32 sec
4 Q6 ~ 1 min
6 Q7 ~2 min
13 Q8 ~ 4 min
12 Q9 ~ 8 min
14 Q10 ~ 17 min
15 Q11 ~34 min
1 Q12 ~ 68 min
2 Q13 ~ 2 hr 15 min
3 Q14 ~4 hr 30 min
Now im wondering if i can do this circuit with a 4060 counter...cause i dont have access to any 4020's.
i also would like to change the interval timings to something like 1 second to like 8 hours for the OFF cycle.
would this be the proper way to change this...is this schematic even correct....could someone post a schematic of a timer capable of this?
its has adjustble ON and OFF delays from 2 seconds to 4h 30min.
Pin # Schematic Pin Delay Time
9 Q1 2 sec
7 Q4 16 sec
5 Q5 32 sec
4 Q6 ~ 1 min
6 Q7 ~2 min
13 Q8 ~ 4 min
12 Q9 ~ 8 min
14 Q10 ~ 17 min
15 Q11 ~34 min
1 Q12 ~ 68 min
2 Q13 ~ 2 hr 15 min
3 Q14 ~4 hr 30 min
Now im wondering if i can do this circuit with a 4060 counter...cause i dont have access to any 4020's.
i also would like to change the interval timings to something like 1 second to like 8 hours for the OFF cycle.
would this be the proper way to change this...is this schematic even correct....could someone post a schematic of a timer capable of this?