The Role of the Traces

Status
Not open for further replies.
In a 2-way speaker usually the tweeter is much more efficient than the woofer, especially if the woofer is too small. Then the power must be blasted to the woofer and the high power needs thick wires to carry the high current.
 
I want to use spiral traces for audio frequencies as I think some how it can work. If it is not used before then I feel it can be used someday ! What is your thinking ? Anything is possible !!!
 
I want to use spiral traces for audio frequencies as I think some how it can work. If it is not used before then I feel it can be used someday ! What is your thinking ? Anything is possible !!!
Click to expand...
For what? i see no need for it. Andy
 
No. A spiral is an inductor. It takes less room on a circuit board to just use a standard coil. same thing.

Putting it on the circuit board will cause inductance in other parts of the circuit that could kill it.
 
RMMM said:
No. A spiral is an inductor. It takes less room on a circuit board to just use a standard coil. same thing.

Putting it on the circuit board will cause inductance in other parts of the circuit that could kill it.
Click to expand...

Inductance is correct and use theory and creativity to make it useful !
 
Status
Not open for further replies.

Similar threads

  • Question
OFF-the-wall idea for momentary ON switch
6 7 8
Replies
148
Views
16K
JimB
T
  • Question
what is the optimum oscillation frequency for operation of uc3842
Replies
8
Views
1K
Nigel Goodwin
  • Question
big boo boo on PCboards traces between smd pads
Replies
10
Views
1K
DerStrom8
N
  • Question
Make signal lights for the AC outlet
Replies
12
Views
2K
ZipZapOuch
J
  • Question
Logarithmic amplifier design for measuring the ON voltage of a GaN transistor / Schematic, Ideas and LTspice simulations available
Replies
9
Views
4K
Tony Stewart
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…