fouadalnoor
Member
haha, okay will do!
and right, if I think of it as a switch I guess it does make sense. When the LM311 is OFF then the output is floating and we just connect it to the pullup resistor causing it to go to 5v (we now have 5v on the input pin of the PIC).
If the LM311 is ON then the output acts like a ground and will pull the input of the PIC low.
Yes?
and right, if I think of it as a switch I guess it does make sense. When the LM311 is OFF then the output is floating and we just connect it to the pullup resistor causing it to go to 5v (we now have 5v on the input pin of the PIC).
If the LM311 is ON then the output acts like a ground and will pull the input of the PIC low.
Yes?