Holes Flow
New Member
Experts,
Objective/Goal:
I have these 2 critters, and I want to use the scope as a poor-man's SA for just audio (up to 20kHz).
Desired:
I will set up a sine sweep on the DG, and feed it to the DS. But I want the scope to trigger on the start (lowest freq) of the sweep each time. This way, I can set the scope width to the same time period as the sweep.
Project:
Passive/Active Bandpass filters for audio spectrum (not for crossovers, but for pre-filtering of band to be subsequently analyzed.
Thank you for any experience/insight!
P.S. I've tried in-scope FFT, and the output isn't useful for this project.
Objective/Goal:
I have these 2 critters, and I want to use the scope as a poor-man's SA for just audio (up to 20kHz).
Desired:
I will set up a sine sweep on the DG, and feed it to the DS. But I want the scope to trigger on the start (lowest freq) of the sweep each time. This way, I can set the scope width to the same time period as the sweep.
Project:
Passive/Active Bandpass filters for audio spectrum (not for crossovers, but for pre-filtering of band to be subsequently analyzed.
Thank you for any experience/insight!
P.S. I've tried in-scope FFT, and the output isn't useful for this project.
