jimbobsimmonds
New Member
i know this is more electrical rather than electronics but was still hoping some people here could help...
my problem is that i have to use a large resistive load of:
Max Power: 10KW @28VDC...
and
Max Power: 13KW @ 208VAC
both are in seperate looms, so what sort of current am i looking at and what sort of cabling will be adequate...
thanks
jimbob
my problem is that i have to use a large resistive load of:
Max Power: 10KW @28VDC...
and
Max Power: 13KW @ 208VAC
both are in seperate looms, so what sort of current am i looking at and what sort of cabling will be adequate...
thanks
jimbob