Thanks for the information Jeff.
audioguru,
It's taken me a while to try & get some data for these speakers, I only have the data for the woofers & nothing at all on the tweeters from the supplier--manufacturer.
I have attached it.
On a different page of the datasheet it says the Frequency response of the woofer is 35Hz-4kHz, but on the sticker on the rear of the speaker it says 35Hz to 6kHz.
To be honest I need to learn a lot more about speakers & in general the crossover circuits before I could attempt to answer anything you ask about it.
I wouldn't be talking from experience but from out my - you get it!
That's why I'm asking you
I have been reading about it all, reading, understanding & doing in a short period of time is a little different.
I need to learn about this, so:
Looking at the data I have for the speaker--driver parameters.
Where they have Impedance at Fo (Zo) 63.4Ω
I take it that this is the speaker Impedance at X Frequency, Is this tested at 1kHz or is this the Impedance at their recommended crossover frequency?
Instead of trusting these figures is it best to test the speakers I have to find the Impedance at the Crossover frequency as it appears i'll have to test the tweeters anyway.
If I understand correctly I need to know the Impedance at the crossover frequency to be able to start with anything--Correct?
One thing I read said to have the crossover frequency at around 600Hz another thing I read said to have the crossover frequency at 2kHz.
I understand that this is a personal preference thing as audio is, but:
Where to start?
Obviously I want to avoid any damage to start with.
Cheers