Sorry about the title anyone can help lol. Just wanted to seem dramatic.
Ok im trying to wire my IR thing without the junebug. No need to reprogram so no ICSP. I took the assembly manual and moved parts around to what i have make but it doesnt work.
There is no junebug involved. Howis this wired ok? What you see is whats connected. I have a 38khz IR Receiver Module in place for the one on the junebug and 5v from a USB B Jack testing with multimeter to make sure.
i added it and that made sense lol .. I will put the resistor but i already took some pictures be aware they dont have the resistor but it will be added ok thanks
Here are some pictures.. remember i just added the resistor am going to put a 22k since its in the junebug.. i might add that whole reset circuit with the sw4, r16, r17 and d3...
**broken link removed** **broken link removed** **broken link removed** **broken link removed**
EDIT: Power for the LED or what ever i put there will goto the bottom rails. and the top is for the PIC
Also the .1 fell off but its there
I hope i didnt miss anything here is my schem for both together: EDIT: R4 is 100 Ohms EDIT 2: Fixed image Including C1 didnt have value (4.7uf) EDIT 3: Forgot Diode on coil lol **broken link removed**
I have it multiplexed for a good reason tho .. if i dont use it like that i might forget how multiplexing works so i intend to use it as much even if same result is formed. lol Since its not doing any harm i might as well leave it also if i change it i would have to change a bunch of code that lights them.