Wiring to bypass IR switch

[Don207]

The DVR 8 channels Liview can turn on only by remote control, but it lost! is it possible to turn on by wiring the IR 3 pin? if yes how to wiring. I am new here need to learn from your expertise. Thanks

 

[throbscottle]

Are you completely sure it doesn't have some buttons hidden behind a panel on the front somewhere? First thing to try, press all over all the front panels and see if any click open!
Also check behind - there might be some kind of switch there, even if tiny.
Next, try to get a "universal remote" which will support your DVR.

If all that fails, unfortunately it's not so simple as bypassing the IR receiver, it needs to be given some control codes from somewhere.

 

[gophert]

It should turn on automatically when power is applied. Something else is wrong.

 

[Don207]

Thanks

 

[Nigel Goodwin]

As usual, common problems are high ESR electrolytics in their PSU's, due to the fitting of sub-standard ones.

 

[Don207]

It should turn on automatically when power is applied. Something else is wrong.

You are right Gophert ! I change the AC adapter then the screen show up! problem solved, thanks a lot!