Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Wiring to bypass IR switch

Status
Not open for further replies.

Don207

New Member
The DVR 8 channels Liview can turn on only by remote control, but it lost! is it possible to turn on by wiring the IR 3 pin? if yes how to wiring. I am new here need to learn from your expertise. Thanks
 
Are you completely sure it doesn't have some buttons hidden behind a panel on the front somewhere? First thing to try, press all over all the front panels and see if any click open!
Also check behind - there might be some kind of switch there, even if tiny.
Next, try to get a "universal remote" which will support your DVR.

If all that fails, unfortunately it's not so simple as bypassing the IR receiver, it needs to be given some control codes from somewhere.
 
It should turn on automatically when power is applied. Something else is wrong.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top