the information you provided is less then required but have a look at the links below. I have done wireless communication between two systems using serial port..
The main requirement is that to communicate between two computers for a distance of about 3killo meter i,e (from Khanna pul to Sadqa abad).
It is batter that, please give me me your mobile number or email address to get information about , I am also from islamabad.
Thanks. . .
Is the transmitter and Receiver IC available on Collage Road?
I am just asking for contact just for gating a better info.
whoever don't worry . . . .
So what can I did. . . .If the rf ICs are not avaiable in Pakistan,
It is very costly to bring it from abroad.
What is your opinion. . . ..
Is I build a transceiver to using a
MAX232(Lavel converter),,
MT8880,CMT8880C-1(Integrated DTMF Transceiver),,
and MC1496(Balanced Modulators/Demodulators),,
OR using micro controller like 89c51, 89S51 e.t.c. . . . . .
If yes so please help me.....
I have just been looking at a few new ICs from TI, the CC1110 & CC1111.
Both are complete radio transceivers with an 8051 on board and will do data speeds of up to 500Kbit. They are only low powered +10dbm but can take a power amplifier. Sorry if it sounds like an advert but they do look interesting.
The best option is to ask your institute/university to provide you with the ICs (this is what i do when i can't find an IC in pakistan )
Mubashar said:
What is your opinion. . . ..
Is I build a transceiver to using a
MAX232(Lavel converter),,
MT8880,CMT8880C-1(Integrated DTMF Transceiver),,
and MC1496(Balanced Modulators/Demodulators),,
OR using micro controller like 89c51, 89S51 e.t.c. . . . . .
If yes so please help me.....
I have just been looking at a few new ICs from TI, the CC1110 & CC1111.
Both are complete radio transceivers with an 8051 on board and will do data speeds of up to 500Kbit. They are only low powered +10dbm but can take a power amplifier. Sorry if it sounds like an advert but they do look interesting.
hi all , peace for you , i want to compound 2 or 4 camera videos in the same input tv trasmitter to control a place ; please show me How to do that ?
How to receive these pictures on the screen ?
thank you fo all
Rabah