chemelec
Well-Known Member
ShortCircuit Posted: Fri May 06, 2005 1:42 pm Post subject:
--------------------------------------------------------------------------------
Almost...here is the dish I'm talikng about.I want to use the existing arm where the LNB is connected to use as my microphone mount.I was wondering if the parabola is a good shape.
Yes that dish will work Very well.
The Microphone goes Exactially where the LNB was mounted, But Ideally inside an Inverted Cup to Prevent Unwanted Noise from coming in from the sides.
The only problem is aiming that dish. Typically the Aiming direction is at the Opposite angle to were the LNB is Mounted.
To make a Good Parabolic Mic, Ideally you will also make a Good Amplifier for it, as well as Some Filters to get rid of Unwanted Noise.
An Adjustable Bandpass filter is useful, so are Low and High Pass Filters.
Take care..........Gary