The Circuit I Posted is a Typical, Quadrupler Multiplier Circuit.
The Output will be 5.6 Times the RMS Input.
Your Circuit is Definately NOT correct.
Build it and it will work.
The Diodes should be rated at 200 Volts MINIMUM.
The Caps should be "Non-Polarized" types and also be rated at 200 Volts or more.
(Film, Polyester or Mylar are good)
Values between .01 to .1 uF will be OK for Low Current Output Tests, with just your meter.
For HIGHER Current Output Loads, you need HIGHER values of Capacitance.