PCB packages

Status
Not open for further replies.

stickpin

New Member
Time to get my pcbs done properly now!

so i need a proper pcb design package instead of paint and pcbwizard.

I have downloaded Eagle as it seems highly rated. It seems really fiddely and frustrating (hopefully i will get used to it?)

anyway my question for now is where can i find these package styles for Eagle:

CASE 211-11
(.500" flange)
**broken link removed**


CASE 211-07
(.380" flange)
**broken link removed**

Im sick of carefully drilling out these flange holes with the tools i have it takes a while.
I feel like i am in for a steep learning curve here to produce the accurate files for etch houses to work from.

Any help or tips or suggestions would be great.

cheers
 
Check Cadsoft's site for packages uploaded by users.
Ask on their user forum.
Make them your self, it is a useful skill that will serve you well.
 
ditto on what 3v0 says ... you'll most likely end up drawing them yourself.

check out www.sparkfun.com, their tutorials section includes a good how-to for making your own parts in Eagle
 
Hi stickpin,

since I know from experience it takes a while to get used to Eagle and the tricks you can apply making a device. I'm not talking about just a package.

As you certainly know a device consists of a symbol (used in the schematic editor) and a package (used in the PCB editor).

If you send the part of the data sheet containing the symbol for the schematic (pin names and connections) and the outline of the mechanical drawing including all relevant dimensions I'll make a device for you in no time. That way you'll have a template which fits 100% to the real part.

Of course I won't charge for the work. I feel if I can give a little help it is OK.

Send the describtion to <hjzelec@freenet.de>

Kind regards

Hans
 
Reactions: 3v0

That would be great if you could! i'll send the data sheets to you.

thanks
 
Hello Mike,

I hope you read this.

I sent a library with two devices, BFL244 and SD1407 and a small PCB design with those parts early in the morning today. The e-mail was returned. Reason: recipient unknown.

Please check your e-mail address and if you have an alternate address let me know that. I'll resend the files thereafter.

Regards

Hans
 
Status
Not open for further replies.

Similar threads

  • Question
pcb malfunction
2
Replies
39
Views
5K
rjenkinsgb
  • Solved
pcb board recover help
2
Replies
28
Views
2K
baristini
F
  • Question
Import PADS file .pcb (binay) into Altium or KiCAD
Replies
8
Views
2K
frox
F
P
  • Solved
Need help identifying PCB component
Replies
8
Views
1K
Diver300
D
F
  • Question
Multipin Panel/PCB Mount Connector – Suggestions?
Replies
8
Views
1K
ZipZapOuch
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…