Maxer said:
" I realise that the very 1st time period of the 555 is longer than all the rest. That would cause the 1st sequence to end with all 6 LEDs lighted and a delay before they are turned off and the next sequence begins"
yea if that can be fixed it be perfect
here is the toggle switch schematic does it look right?
it shoudl be correct i found it on another website instructing me to to do it this way..
here is a site that might help you Audio with this
thanks
max
**broken link removed**
https://www.4qdtec.com/wfg.html
friend said this might help you with that problem where all 6 light up at the end and its slow..
I dont think that toggle switch is right, you need the mode connected to either ground or +VCC, it wont work without it (I'm using a LM3915 for my led project and I just discoverd this out tonight).
Here's how you'll have to do it (I'm not sure if you'll still use this circuit or what, its hard keeping up with this thread.)
the resistor i added will function as a pull up resistor. The box there is supposed to go to VCC some how the paint program got deleated off my comp so I had to use an impossible program to draw it.
Oh, I would think a 1k resistor would work for the pull up.