Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
page 7, look in the "Choosing R1 and C1" paragraph, right at the end there is an equation for Fmax and then you have to do some detective work to decide the best values for the variables. I think I2 is a constant and is given earlier (not sure if it is constant or not, but only wanted to spend so much time reading), they recommend C no lower than 500pF for accuracy, and I used the lowest voltage on the spec sheet, 6V for Vcc. It wasn't obvious I agree and required one to actually read much of the data sheet.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
