MrDEB
Well-Known Member
how does one test out some code using a Junebug connected with the con2 port and a 5 cond ribbon cable to a board w/ several LEDs and a PIC.
can program the PIC but running a test of the board and the LEDs (current draw total = 30ma, using large resistors)
probally should have stuck this post in the Junebug help but that post is getting way toooo long.
lots of info and help in that post.
can program the PIC but running a test of the board and the LEDs (current draw total = 30ma, using large resistors)
probally should have stuck this post in the Junebug help but that post is getting way toooo long.
lots of info and help in that post.