Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

ICD

Status
Not open for further replies.

slavenp

New Member
Hi
I want bild your own ICD module.I use Microcode studio +.
I need hardvare for that.
Do I using mplab and picbasic ?
 
You can do it in basic, Micro Code Studio was designed for use with Pic Basic Compilers from MeLabs.Micro Code Studio's ICD only works with one micro(16F628) you have to purchase MCS Plus to use other micros
 
slavenp said:
Hi
I want bild your own ICD module.I use Microcode studio +.
I need hardvare for that.
Do I using mplab and picbasic ?

Please, I would like to know what is ICD stands for?
 
Hi
I use Microcode studio plus .
Please tell me more about hardware for using ICD.

(Sory fom my bad english)
 
ICD stands for In Circuit Debugger.I don't use the ICD, I've only tried it, and I used the LAB X-1 demo board from Melabs.If you make your own hardware it's fairly easy, you just need a MAX232 or similar.There is a diagram in the MCS help section.
 
Status
Not open for further replies.

Latest threads

New Articles From Microcontroller Tips

Back
Top