vedo35
Member
Guys this of my smps transformer you are seeing pinouts. I want to use SG6841 smps controller.
My question is at secondary side to which pinout(s ) do i have to connect ground? There are 9 pinouts . if works normal probably i will get at least 6- or 7 outs. I checked a lot of scheme with SG6841 and also own datasheet but between windings some scheme using zener diots and in own datasheet scheme there are only one winding. But mine there are 4 windings with common used one total 5 windings. Can you help me for secondary side ground and between winding connection reletions?
Thanks for all helpful answers or schemes.
My question is at secondary side to which pinout(s ) do i have to connect ground? There are 9 pinouts . if works normal probably i will get at least 6- or 7 outs. I checked a lot of scheme with SG6841 and also own datasheet but between windings some scheme using zener diots and in own datasheet scheme there are only one winding. But mine there are 4 windings with common used one total 5 windings. Can you help me for secondary side ground and between winding connection reletions?
Thanks for all helpful answers or schemes.