Hello,
Well then we'll have to work with the photos of the breadboard itself.
From that most recent pic, there are still several wiring errors. See attachment. Move the three wires into the other holes as shown near the top left, remove the resistor with the big red "X", and rotate the transistor near the bottom of the drawing with the blue-green circle on top 180 degrees so it is oriented the same as the transistor near the top.
Take another pic from the top like that one and we'll see if everything is right. It may turn out that that bottom transistor is also burnt out, but dont use any more transistors until the wiring is verified, unless of course you have a lot of transistors on hand.