S sekoere New Member Nov 28, 2007 #1 Hi guys I want to use a simple envelop detector to detect a signal. The carrier is at a 100 MHz. Which diode can rectify well at these frequencies?
Hi guys I want to use a simple envelop detector to detect a signal. The carrier is at a 100 MHz. Which diode can rectify well at these frequencies?
JimB Super Moderator Most Helpful Member Nov 28, 2007 #2 At a quick guess a 1N914 or a 1N4184 would be OK. JimB
RadioRon Well-Known Member Nov 28, 2007 #3 Jim's suggestions should work well. If you have access to any RF schottky diodes, these are often very good because they have a lower knee voltage and so are a bit more sensitive.
Jim's suggestions should work well. If you have access to any RF schottky diodes, these are often very good because they have a lower knee voltage and so are a bit more sensitive.