Circuit board

sammy004 · Dec 16, 2005

Hi guys I can seam to design the artwork for this curcuit I'm new to electronic and I would like to design this circuit. Is there anyone that can help me out how to design it or can someone please design it out for me it would be greatly appreciated. for this curcuit
h**p://www.aaroncake.net/circuits/dimmer.htm

windozeuser · Dec 16, 2005

What do you mean by designing the circuit? The circuit appears to be already designed to me. If you're needing to redraw the schematic. Then theres a number of programs that will help you do that. Listed below:

Design Works Lite:

**broken link removed**

EAGLE:

Hope that helped.

sammy004 · Dec 16, 2005

What I meant was so I can make it so I can trasfer it to a cooper board and put the compononts on it. I don't know how to take a drawing like that and make it to a drawing that where you can accually mount the components. When I have a copperboard with the traces on it I find it easyer to just solder the pieces on. If some can do that for me I would really appreciate it.
Thank you

windozeuser · Dec 16, 2005

This should help you:

https://www.robotroom.com/PCB.html

chemelec · Dec 17, 2005

sammy004 said:
Hi guys I can seam to design the artwork for this curcuit I'm new to electronic and I would like to design this circuit. Is there anyone that can help me out how to design it or can someone please design it out for me it would be greatly appreciated. for this curcuit
h**p://www.aaroncake.net/circuits/dimmer.htm

If Needed, I could create you the Pattern or even the cicuit board.

But this project is so simple, Probably a piece of Vector Board is Quicker.

Merry Xmas.

sammy004 · Dec 17, 2005

Thanks Gary can you do that for me.

sammy004 · Dec 18, 2005

whats up no reply.??????????????????

Russlk · Dec 18, 2005

We are here to offer advice and information, but are not going to do things for you. I might gin up a design, but you have to build it.

sammy004 · Dec 18, 2005

can you gin it up for me

chemelec · Dec 18, 2005

sammy004 said:
whats up no reply.??????????????????

Sorry,I don't see all replys, every day.

I assume you have the schematic?

Send it to me in an email.

Take care........Gary

2PAC Mafia · Dec 19, 2005

Hello,

Sorry,I don't see all replys, every day.

I assume you have the schematic?

Send it to me in an email.

Take care........Gary

The schematic is there:

https://www.aaroncake.net/circuits/dimmer.htm

Take care because the circuit is designed only for 120Vac, not for 220Vac... I also think the best and faster would be to create it on a vector PCB.

chemelec · Dec 19, 2005

"2PAC Mafia" Hello, https://www.aaroncake.net/circuits/dimmer.htm

... I also think the best and faster would be to create it on a vector PCB.

I quite agree. Vector board is definately good for such a Simple Circuit.

But if you want this on PCB, I need to know the Pinout of that Triac.

Circuit board

sammy004

New Member

windozeuser

Member

sammy004

New Member

windozeuser

Member

chemelec

Well-Known Member

sammy004

New Member

sammy004

New Member

Russlk

New Member

sammy004

New Member

chemelec

Well-Known Member

2PAC Mafia

Member

chemelec

Well-Known Member

Similar threads

Circuit board

New Member

Member

New Member

Member

Well-Known Member

New Member

New Member

New Member

New Member

Well-Known Member

Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency