Everythingiselectronics
New Member
In this video I build my own diy launchpad from scratch. This project can also be referred to as a 64 button midi controller or Adafruit's untztrument sound board. I used Adafruit's tutorial for the wiring and software, and I used Tinkercad to design a case to print out on my Tronxy 3D printer. All of the credit for this project should go directly to Adafruit.
Adafruit's tutorial: https://learn.adafruit.com/untztrument-trellis-midi-instrument
3D Printied case stl file: https://www.thingiverse.com/thing:2376245
My 3D Printer: https://rover.ebay.com/rover/1/711-...046357?hash=item3f730b1755:g:dLYAAOSwjDZYcFU5
Parts:
4X M3 10mm Screws
4X Silicone Button Pads: https://www.adafruit.com/product/1611
4X Trellis Boards: https://www.adafruit.com/product/1616
Arduino Leonardo: https://rover.ebay.com/rover/1/711-...E-USB-cable-/121851828025?hash=item1c5eef5739
LEDs: https://rover.ebay.com/rover/1/711-...ight-CA-NEW-/141976472523?hash=item210e750bcb
Music: Lensko - Rebirth