• Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.
Not open for further replies.

In this video I build my own diy launchpad from scratch. This project can also be referred to as a 64 button midi controller or Adafruit's untztrument sound board. I used Adafruit's tutorial for the wiring and software, and I used Tinkercad to design a case to print out on my Tronxy 3D printer. All of the credit for this project should go directly to Adafruit.

Adafruit's tutorial: https://learn.adafruit.com/untztrument-trellis-midi-instrument

3D Printied case stl file: https://www.thingiverse.com/thing:2376245

My 3D Printer: https://rover.ebay.com/rover/1/711-...046357?hash=item3f730b1755:g:dLYAAOSwjDZYcFU5


4X M3 10mm Screws

4X Silicone Button Pads: https://www.adafruit.com/product/1611

4X Trellis Boards: https://www.adafruit.com/product/1616

Arduino Leonardo: https://rover.ebay.com/rover/1/711-...E-USB-cable-/121851828025?hash=item1c5eef5739

LEDs: https://rover.ebay.com/rover/1/711-...ight-CA-NEW-/141976472523?hash=item210e750bcb

Music: Lensko - Rebirth
Not open for further replies.

EE World Online Articles