basic Op-amp issue ... need help to choose the right one!!

Status
Not open for further replies.

yaniss

New Member
Hello world!
I have a very basic problem that i don't know how to solve (it is not really my field...)
I have a voltage between 0-10V and i would like to change it as 0-20V... i thought of an non-inverter amplifier but i really don't know what to choose...
my supervisor gave me this list https://www.analog.com/en/all-opera...tional-amplifiers-op-amps/products/index.html but i don't understand the caracteristics.... please help me!

For further information: the input of the op-amp is connected to the output of an FPGA board, and the output of the amplifier is connected to an tunable optical filter.

If you need any further information please do not hesitate!

Thank you for your time!

Yanis
 

hi,
Using your link and entering the required OPA parameters, the SEARCH option shows these OPA's as being suitable.
 

Attachments

  • AAesp05.gif
    38.6 KB · Views: 132
If you want to use just a single positive voltage power supply for the op amp, then look for those with rail-rail input and output.
 
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…