Joe McGivern
New Member
I'm putting together the boards for Nigels tutorials.
I bought some materials for the assembly of the boards and needless to say, 20 MHz oscillators were part of the order.
Main board No2 has a 20 MHz crystal. Two connections only are indicated on the circuit diagram.
The crystals I bought are manufactured by Fox and are type FS02 B 20.000 511. They have have four connections and are contained in a rectangular plastic enclosure. The crystal in the photo in Nigel's Tutorial is different.
I have looked at the data available to me and can't arrive at a decision as to how the crystal should be connected or if indeed it is unsuitable and another type of component should be used.
Can any one advise me please.
JMcG
I bought some materials for the assembly of the boards and needless to say, 20 MHz oscillators were part of the order.
Main board No2 has a 20 MHz crystal. Two connections only are indicated on the circuit diagram.
The crystals I bought are manufactured by Fox and are type FS02 B 20.000 511. They have have four connections and are contained in a rectangular plastic enclosure. The crystal in the photo in Nigel's Tutorial is different.
I have looked at the data available to me and can't arrive at a decision as to how the crystal should be connected or if indeed it is unsuitable and another type of component should be used.
Can any one advise me please.
JMcG