killivolt
Well-Known Member
What do you think ?
After figuring my LED in the previous circuit I got some 1.2k 1/2 watts. I put three in series rendering 3.5k - 1.5 watts. I'm not sure about that yet but.....
I measured 37.4.v across the cap and with the coil in circuit across the coil was 36.5v.
So, I put in the LED measuring the vf at 1.9 which should give me about 10ma operating current.
Edit: I might add it took a bad Hum out of the Transformer also.
kv
After figuring my LED in the previous circuit I got some 1.2k 1/2 watts. I put three in series rendering 3.5k - 1.5 watts. I'm not sure about that yet but.....
I measured 37.4.v across the cap and with the coil in circuit across the coil was 36.5v.
So, I put in the LED measuring the vf at 1.9 which should give me about 10ma operating current.
Edit: I might add it took a bad Hum out of the Transformer also.
kv
Last edited: