Futterama
Member
Hello forum,
I have a PIC10F206 driving a red SMD LED. To get the desired brightness, I would need to drive it with 25mA. 25mA is the absolute MAX for the PIC source current. The voltage on the PIC pin will drop to about 2.5V (Vcc = 5V) when sourcing 25mA.
Will I damage the PIC over time when sourcing the MAX current?
Regards,
Futterama
I have a PIC10F206 driving a red SMD LED. To get the desired brightness, I would need to drive it with 25mA. 25mA is the absolute MAX for the PIC source current. The voltage on the PIC pin will drop to about 2.5V (Vcc = 5V) when sourcing 25mA.
Will I damage the PIC over time when sourcing the MAX current?
Regards,
Futterama