RODALCO
Well-Known Member
Hi Mark,
just have re-drawn the schematic for the seconds clocks with the pilot dial inserted.
This is for the seconds clocks, as for the half minute clocks the wires don't go straight to the accu but via the C 7 clock's contacts.
Hope it makes it a bit clearer.
The 150, 180 ohm dummy Resistor goes in parallel with the C1-C4 slave clocks.
Regards, Ray
just have re-drawn the schematic for the seconds clocks with the pilot dial inserted.
This is for the seconds clocks, as for the half minute clocks the wires don't go straight to the accu but via the C 7 clock's contacts.
Hope it makes it a bit clearer.
The 150, 180 ohm dummy Resistor goes in parallel with the C1-C4 slave clocks.
Regards, Ray