7 Watt is 220R fine, current about 110 mA, just add a couple of 24 Volt slaves to get near the 150 mA's. or get two R's of 220 R in parrallel which give you 220 mA loading.
7 Watt is 220R fine, current about 110 mA, just add a couple of 24 Volt slaves to get near the 150 mA's. or get two R's of 220 R in parrallel which give you 220 mA loading.
I had to more of the 7w 220r in the terminals to get enough draw on the current.One line 3 I added a resistor and two 3000ohm slaves and they worked fine but nothing from the pilot.I added 6 more resistors to 6 more outputs but had to adjust the current and the Volt's to get a min. of 150ma. and Bingo it worked!! I got a response from the pilot and the aux. slaves..
Trouble is now I will require a bigger PSU. as mine is max. 36v 2 amp. but just to get those going to everything my supply could give.
Advice on the PSU.?
Once again thanks for the advice,, good to have an electronics and a clock interest!!