• Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

TOSlink to Class D amp

Status
Not open for further replies.

Frozenguy

Member
Hey folks, I'm building a Class D amp with TOSlink optical input.

Am I on the right track here with an SPDIF decoder to i2s such as: DIR9001: http://www.ti.com/lit/ds/symlink/dir9001.pdf
and a Class D amp such as: TAS6422: http://www.ti.com/lit/ds/symlink/tas6422-q1.pdf


This is how I plan to interface the chips:

DIR9001 to TAS6422
BCKO - SCLK
SCKO - MCLK
DOUT - SDIN
LRCKO - FSYNC


TAS6422
SCLK - audio bit and serial clock input
MCLK - Audio master clock input
SDIN - I2S audio data input
FSYNC - Audio frame clock input

SPDIF
BCKO - Audio data bit clock output
SCKO - System clock output
DOUT - 16-24 bit decoded serial digital audio data output
LRCKO - Audio data latch enable output


I feel more confident after typing it out.

1) Is the TAS 6422 a class d amp with an audio data processor in it?
2) Is an ADP a type of DSP?

Thank you for your time.
 
Status
Not open for further replies.

EE World Online Articles

Loading
Top