Switch to turn on off 9v device wirelessly

Is there anything I can make to turn a 9v led on or off wirelessly?

sitch for 9v device

MikeMl said:

KEYCHAIN REMOTE CONTROL, 12VDC 6 AMP | AllElectronics.com

Click to expand...

This device has to be triggered by a dry set of contacts in a panel. Thanks for the reply though.

The dry set of contacts has to trip something to send a sgnal to a battery powered LED.

The dry set of contacts has to trip something to send a sgnal to a battery powered LED.

Click to expand...

That wasn't in your original request. There are other solutions, but first do you have any other requirements that you're saving just to surprise us?

Thats what I want to know what I can do. I have an alarm cabinet. I would like it to trip a led in another part of the building if the alarm triggers. I can do this if I could run a cable, but due to the construction of the building, I can not get a cable to the locatioon. They do not want wire mold. So what I would like to find out if I could trigger a device using an RB5 relay to send a signsl to smething to turn on a battery operated LED. Sorry I did not explain myself well at all.

How far away is the receiver, and what kinds of walls or other obstructions are in the way?


Torben