switch help plz

i need a switch that i can use to reverse a moter witch means reversing the poles so i need a DPDT switch right and cane some one tell me how to wire this one up so that it dose that witch lugs to solder to t make it work right here is the link https://www.radioshack.com/category.asp?catalog_name=CTLG&category_name=CTLG_011_002_015_001&Page=1

You don't say so in your post, but I am assuming that you are talking about a standard 2-lead DC motor. You can use any DPDT (double-pole, double throw) switch that:

1. is not momentary in nature (unless momentary action is what you want);
2. is rated for the voltage and current anticipated in the operational circuit; and
3. meets your physical mounting and connection requirements.

Here is a schematic of the switch in circuit, and an illustration of the proper connections to a standard DPDT switch:

**broken link removed**

**broken link removed**

Post back if you need more help...

Use DPDT with center off.
https://www.radioshack.com/category.asp?catalog_name=CTLG&category_name=CTLG_011_002_015_006&Page=1

Hey ChrisP! You are quick...

Sebi said:

Hey ChrisP! You are quick...

Click to expand...

Pretty much had it ready -- something in a handout for my students...

thanks for all the help that takes care of my question