Surveillance Cameras

Status
Not open for further replies.

premkumar9

Member
Hi,
I need to install a surveillance camera on a Traffic Signal Post to record the violation of RED signal. The number plates of such vehicles to be legible in the recording . Date and time also to be noted. I look for suggestions for a cost effective solution.
 
Try this :
**broken link removed**


Code:
CAMERA SENSOR Image Sensor 	16:9, 2/3” format, color or mono
Effective Pixels 	1920x1080, 7.4µm square pixels
Frame Rate 	15 fps at 1920x1080, 30 fps at 1920x480
Dynamic Range 	64dB
Sensitivity 	<0.5 lux at F 1.0
Auto Exposure 	Automatic / Manual (when used with SLR lens)
White Balance 	Automatic / Manual (when used with SLR lens)
Dimensions (W x H x D) 	3.0” x 3.0” x 8.5” TBD (not including lens)
Mass 	~600g
Power Requirement 	12VDC
Power Consumption 	<10 Watts
Operating Temperature 	-10° C to +50° C (environmental enclosure will provide extended temperatures with fan / heater)
Operating Humidity 	5%-95%, Non-condensing
Interface Connector 	RJ45 twisted pair cable, 10/100baseT Ethernet 	Print
Lens Mount 	SLR Canon Bayonet-Mount - lens not included
Image Buffer 	48 MB standard, 128MB optional
 
Last edited:
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…