When I tried to run mplab, and selected pickit2 as programer I get message
Initializing PICkit 2 version 0.0.3.30
Found PICkit 2 - Operating System Version 2.32.0
Target power not detected - Powering from PICkit 2 ( 5.00V)
PKWarn0003: Unexpected device ID: Please verify that a PIC18F452 is correctly installed in the application. (Expected ID = 0x420, ID Read = 0x7C0)
the yellow led goes off.
If I press the ok button the screen displays Pickit2 ready
I'm working with a Junebug I bought assembled, just trying to find what I need to to run some of the tutorial pieces.
I don't really understand what I need to work with the Junebug.
Jerry
Initializing PICkit 2 version 0.0.3.30
Found PICkit 2 - Operating System Version 2.32.0
Target power not detected - Powering from PICkit 2 ( 5.00V)
PKWarn0003: Unexpected device ID: Please verify that a PIC18F452 is correctly installed in the application. (Expected ID = 0x420, ID Read = 0x7C0
ok i completed the junebug.bas program and I now have 6 led flashing in a row.
The problem is how do I stop it. I quit swordfish. I disconnected the usb connection (i persume the power.
I press the reset buttons and the leds stop but as soon as I release the button it starts flashing again.
I would really like to run the uart demo, but I don't where to get the pickit2 uart tool.
Thanks Jerry