rmain1972
Member
I checked it on oshon soft. The microcontroller view was not setting RC5 to high. I found that in the .h PIN_C5 was not in the fixed io outputs line. I added PIN_C5, and it was fixed in the microcontroller view. I also cheated in oshon soft. I set time_elasped to 99, so that I would not have to wait a full simulated second in order to test the RC5 output. In short, make sure your .h file has this line in it: #use fixed_IO(C_outputs = PIN_C0,PIN_C1,PIN_C2,PIN_C3,PIN_C4,PIN_C5)
