Bearly Legal
New Member
Hey guys, I'm pretty good with electronics but this is the first time im attempting to build a circuit and the whole resistor,capacitor,ohms, etc, etc, just throws me for a loop. So maybe i could explain what im trying to do and someone could do a quick sketch that i could understand. not like a actual technical schematic cause ive looked at a few of those and find them difficult to understand.
Im trying to make a circuit board to be mounted under a switch panel that will be used to power accessories. its going to be 12vdc powered and wish to use tact switches and bi color leds to show the status of the switches.
Going to be 5 switches to run 5 different accessories like fans and a water pump. i would like the green side of the led to light up when i start the system and the red side to light when the accessory is running.
I bought a few parts from radio shack. a board, SPST tact switches and 2 lead bi color leds. please let me know what you guys think, if anyone can help, or you need more info. Thanks in advance.
Im trying to make a circuit board to be mounted under a switch panel that will be used to power accessories. its going to be 12vdc powered and wish to use tact switches and bi color leds to show the status of the switches.
Going to be 5 switches to run 5 different accessories like fans and a water pump. i would like the green side of the led to light up when i start the system and the red side to light when the accessory is running.
I bought a few parts from radio shack. a board, SPST tact switches and 2 lead bi color leds. please let me know what you guys think, if anyone can help, or you need more info. Thanks in advance.