Gulliver55
New Member
Hello,
I am looking for a turn key solution, a transmitter/receiver package I can purchase that will fit the following:
Transmitter and receiver run off 12-15 volt DC
Receiver can possible run from 5 to 9 volt DC
Receiver no bigger than 2inches long by 1 inch high by 1/2 inch thick
Transmitter needs to take a 12volt DC on/off signal [source signal] ( the signal is the 12/volt DC going from on to off to on and so on)
and send that on/off to the receiver
Receiver needs to take that on/off and switch another wire on/off to mimic the wire connected as the signal source
to the transmitter
Any ideas??
I believe these could work but the transmitter seems to be button activated and I don't think that it would do what I need but is there another version or can this one be modified?
**broken link removed**
**broken link removed**
I am looking for a turn key solution, a transmitter/receiver package I can purchase that will fit the following:
Transmitter and receiver run off 12-15 volt DC
Receiver can possible run from 5 to 9 volt DC
Receiver no bigger than 2inches long by 1 inch high by 1/2 inch thick
Transmitter needs to take a 12volt DC on/off signal [source signal] ( the signal is the 12/volt DC going from on to off to on and so on)
and send that on/off to the receiver
Receiver needs to take that on/off and switch another wire on/off to mimic the wire connected as the signal source
to the transmitter
Any ideas??
I believe these could work but the transmitter seems to be button activated and I don't think that it would do what I need but is there another version or can this one be modified?
**broken link removed**
**broken link removed**