A alphacat New Member Jan 22, 2010 #1 I got this design of AC to AC regulator, and was wonderig why do the Gates of the MOSFETs there remain unconnected. Thanks. Attachments AVR.jpg 68.8 KB · Views: 155 Last edited: Jan 22, 2010
I got this design of AC to AC regulator, and was wonderig why do the Gates of the MOSFETs there remain unconnected. Thanks.
B BrownOut Banned Jan 22, 2010 #2 Looks like the diagram was never finished to me. Last edited: Jan 22, 2010
S schmitt trigger Well-Known Member Most Helpful Member Jan 22, 2010 #5 In textbooks, is common practice to leave things out, to reduce the clutter. Obviously that schematic shown is only drawn to analyze the current and voltage relationships in the main power circuit.
In textbooks, is common practice to leave things out, to reduce the clutter. Obviously that schematic shown is only drawn to analyze the current and voltage relationships in the main power circuit.
B BrownOut Banned Jan 22, 2010 #6 Or else the designer went on a coffee break and never came back. And don't think that never happens