icecapsule
New Member
Hi, I want to wire quite a lot of lamps in parallel to a battery and I was wondering how many could I have in one set? And what battery would I use?
So, I want to wire as many of these as possible;
Panel Lamps 15x29mm E10
15mm x 29mm 2.4V 625MA 1.5W E10
There are lots of other ones in this range that would also be suitable that go from 2.4V (this ones the lowest) to 60V, with the MA and W changing accordingly- so if it's easier to use an alternative bulb let me know, I got the bulb spec from https://www.lampspecs.co.uk under Miniature Lamps.
Much like fairy lights I suppose, but they have to be these bulb types
I've done light projects before but usually under the direction of someone else, so physically I sort of know what I'm doing, but starting a project off from scratch and working out the bulb to battery ratio I'm not so goof at!
Thanks!
Claire
So, I want to wire as many of these as possible;
Panel Lamps 15x29mm E10
15mm x 29mm 2.4V 625MA 1.5W E10
There are lots of other ones in this range that would also be suitable that go from 2.4V (this ones the lowest) to 60V, with the MA and W changing accordingly- so if it's easier to use an alternative bulb let me know, I got the bulb spec from https://www.lampspecs.co.uk under Miniature Lamps.
Much like fairy lights I suppose, but they have to be these bulb types
I've done light projects before but usually under the direction of someone else, so physically I sort of know what I'm doing, but starting a project off from scratch and working out the bulb to battery ratio I'm not so goof at!
Thanks!
Claire