Looking for a wall mounted enclosure

[microamp]

I purchased a temperature monitoring system from insmart and need some sensor enclosures to mount the sensors on walls so that they are nicely enclosed.

Anyone got any recommendations.

The sensors are not very large 30mm x10mm x 15mm

Picture at https://www.insmart.com/temperature/rafter.html

Thanks

Mike

 

[microamp]

Found something

Finally found something at farnell but the enclosure is not ventillated to allow air flow to the sensor. Anything more purpose made for a temperature sensor would be appreciated.

 

[blueroomelectronics]

They're 1-wire temperature sensors, probably DS18S20PAR (2wire). Neat. A room temperature sensor should be about 4' from the floor and slightly off the wall about 1" to avoid updrafts.

 

[nickelflippr]

I plan on using a couple of these for one wire sensors. Have to poke my own holes though for venting.

 

[microamp]

Thanks for the link. nice enclosure they have a great range as well but no ventillated enclosures

 

[nickelflippr]

Well then, here is your **broken link removed** if you don't mind the sticker.

 

[mneary]

Maybe you can order them without the label, and make your own.