I'm desperately trying to find a way of displaying the following 4 parameters on an LCD display: 2 sets of voltage (both DC and AC), temperature and current.
The LCD display i was thinking of using is the Matrix Orbital model MOP-AL204A-BBTR. I've attached the spec sheet.
I've been told i need to use a pic controller and some software to program it. The thing is, once programmed, the screen will be fitted to an enclosure so it needs to be effectively standalone (not connected to a pc)
Can anyone help
Thanks very much for the info 3v0. Yes, the values are from sensors, at least for the temperatures, but i'm unsure as to how to wire the voltage/current inputs as they are UK mains (240Ac). I'm guessing i'll probably use a serial display, as i read somewhere that it's easier to use than parallel.
Sorry, one other question. Could you recommend a suitable PIC for the job i.e one with multiple inputs