Mosaic
Well-Known Member
Hi All :
I did an app and prototype based on the ESP12E IoT chips.
I am getting irregular comm issues....sometimes it's 100% sometimes down to 50%. No WiFi competition the router signal is 5 ' away.
The app was done in HTTP/TCP via the arduino IDE. I see that MQTT may be the better approach.
Can anyone advise?
EDIT: I also discovered the ESP8266 I2C protocol init string is flawed in the arduino IDE. I am forced to read the first I2C byte twice and discard the 1st read as it returns a NAK instead of an ACK when the logic analyzer looks at it.
I did an app and prototype based on the ESP12E IoT chips.
I am getting irregular comm issues....sometimes it's 100% sometimes down to 50%. No WiFi competition the router signal is 5 ' away.
The app was done in HTTP/TCP via the arduino IDE. I see that MQTT may be the better approach.
Can anyone advise?
EDIT: I also discovered the ESP8266 I2C protocol init string is flawed in the arduino IDE. I am forced to read the first I2C byte twice and discard the 1st read as it returns a NAK instead of an ACK when the logic analyzer looks at it.