elpidiovaldez5
New Member
I would like to use the USB 2.0 port on a Raspberry Pi. Unfortunately the Pi is fixed in an enclosure with very limited space for the USB connector (they are so long !). There are no access pins to the USB on the Pi's board. It is a silly, but very frustrating problem.
I think I might be able to make up a short USB connector using a male USB A connector for wired connections (not SMD). Alternatively a USB cable with a 90 bend might work. Can anyone point me to a source of something appropriate.
I think I might be able to make up a short USB connector using a male USB A connector for wired connections (not SMD). Alternatively a USB cable with a 90 bend might work. Can anyone point me to a source of something appropriate.