I agree, maybe I was a little fast to jump the gun
It's just so much conflicting information that I can't really decide, but thank to everyone who has replied.
Things I extracted from all discussions:
- motors draw a lot more current when they work connected than when idle
- if the current drawn from motors exceeds power supply output current, power supply will burn out
- same for voltage, if more voltage than motors are made for is applied, motors will burn out
Since quite a few people have been telling me not to use power supplies I provided link for, I started looking for transformer, like this
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.47.50fd7486e4UQlw
Then I must find one Bridge motor controller that has about 20A (?) outout and then 24V * 20A = 480Watt. Is that a reasonable thinking? Maybe even soft start driver? like L-298
Or find a different motor, I guess it's more important that it has high torque and gears.. But still I didn't really extrapolate if it NEEDS gears or not, atleast for this project. Mind, low budget
edit: why not use a rectifier, something like this:
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.62.69126323Zcck7C
35Amperes should be enough right?
or even this one: **broken link removed**