Continue to Site

Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Register Log in
  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

help me verify a complete circuit on OrCAD

Status
Not open for further replies.
L

luish

New Member
I have a passband filter with a network type pi circuit and want to view on my boding plot from pspice attenuation (dB) vs frequency (Hz) my source and load are 50 ohm impedance, C1 & C2 = 40 nF and inductor is L1 = 1.5 uH. Can anyone help me verify a complete circuit on OrCAD shematic and view my results on Pspice. I really appreciate.
 
Status
Not open for further replies.

Similar threads

R
  • Question
Complete beginner
Replies
8
Views
1K
Tony Stewart
Tony Stewart
S
  • Question
Bypassing a on/off switch on desiccant dehumidifier
Replies
3
Views
466
ZipZapOuch
ZipZapOuch
J
  • Question
Making A Delay Circuit
Replies
2
Views
488
JaforSadik
J
Lightium
Help reduce noise on USB oscilloscope.
Replies
9
Views
2K
Lightium
Lightium
G
  • Question
A/D converter reference voltage on negative terminal
Replies
19
Views
1K
gjoo
G

Latest threads

New Articles From Microcontroller Tips

Back
Top