In today's schematic, the values of R1, R2, R3 and R4 are still wrong and need to be changed to 120 ohms and 620 ohms. C5 and C6 still need to be removed.
I just noticed that the value of C1 is far too small for a medium-current power supply. 220uF is good for a current of only 70mA. Use 2200uf for a current of 700mA. Use 4700uF for a current of 1.5A. Use 10,000uF for a current of 3.2A.
I don't remember how many LEDs will be turned on at the same time but if their total continuous current is 1.5A then the transformer should be 2A.
I just noticed that the value for C9 and C10 have an unusual and hard to find value of 0.56uF. Use a standard value of 0.33uF.