Welcome to our site!

Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

  • Welcome to our site! Electro Tech is an online community (with over 170,000 members) who enjoy talking about and building electronic circuits, projects and gadgets. To participate you need to register. Registration is free. Click here to register now.

Eberspacher diesel water heater Hydronics 10 ECu socket?

Eynhallow

New Member
I have an old Eberspacher Hydronics 10W diesel heater I want to get going again, but the socket which connects to the wiring loom is missing.
It is identified as S1 in the trouble shooting and repair guide.
I’ve attached the circuit diagram, a photo of the socket and the manufactures plate on the Hydronics 10W.
As I understand it, the socket is either fitted to the module which contains the ECU or fitted to a cable which is moulded into the ECU box. When the ECU fails the whole unit must be replaced (very expensive!), but this mean that there must be a lot of S1 sockets in scrap boxes, because a new ECU comes with a new S1 socket.
Does anyone have an old S1 socket I could buy, or can anyone identify the socket so I can buy one?
20210622_172852.jpg

Eberspacher plug and socket.jpg
 

Attachments

  • Hydronics 10 circuit diagram.pdf
    112.7 KB · Views: 8

Latest threads

EE World Online Articles

Loading
Top